Maine Trailer | Storage and Shipping Container Leasing and Trailer Sales in Hampden, Maine
Universal brake control installation kit. Includes the necessary wiring and connectors to hard wire the brake control to the truck. Includes • Wire • Terminals • Breaker
Two-sided tailgate lift assist; it attaches to both sides of the tailgate. This prevents tailgates from warping or the hinges from deteriorating prematurely from uneven stresses. It also helps to prevent the full weight of the tailgate from smashing down in the event one side were ever to fail. Fully encloses the lifting system inside a housing; this is a very important design feature which helps to prevent injuries and also keeps people from getting a finger, hand or any other item caught and cut off in the lifting system.Takes 100% of the weight off most trailer tailgates.Works best on open utility trailers with side rails 10 to 24 inches in height and tailgates 4 to 6 feet in height.Works on trailers with square tube, round tube, or angle side rails.Works on trailer tailgates that are four, five and six feet tall.Helps reduce injuries and worker's compensation claims.Helps reduce the risk of devastating injury to you and others.Helps reduce the risk of expensive property damage.Attaches to your trailer quickly and easily. You can either attach it with the supplied hardware or spot-weld it on.
Adjuster Plug for Trailer Brake Assemblies • Fits Dexter & Redline 7" x 1-1/4", 10" x 1-1/2", 10" x 2-1/4", and 12" x 2" electric and hydraulic brake assemblies • Fits Demco/Dico 10" x 2-1/4" and 12" x 2" hydraulic brake assemblies • Qty. 4 plugs • Overall dimensions 1-3/32" long x 15/32" wide • Plug bottom dimensions 63/34" long x 21/64" wide
Shoe Return Spring for 10" x 2-1/4" and 12" x 2" Brake Assemblies • Fits 10" x 2-1/4" Dexter, Redline, and Hayes electric and single servo hydraulic brake assemblies and 12" x 2" electric brake assemblies • Fits 10" x 2-1/4" Atwood and Demco/Dico single servo hydraulic brake assemblies • Works on left or right hand assemblies • Qty. 1 set(1 wheel)
Brake Magnet for Dexter & Redline 4.4k & 7K brake assemblies. • Fits Dexter & Redline 4.4k & 7k electric brakes • Black wire • Hardware included • Qty. 1
Brake Magnet for Dexter 6k electric brakes • Fits Dexter 12" x 2" 6k electric brakes(oblong new style) • White wire • Hardware included • Qty. 1
Brake Magnet for 10" electric brakes. Genuine Dexter magnet • Fits 3.5k Dexter, Al-ko/Hayes, Axle-tek, and Redline 10" x 2-1/4" electric brakes • Green wire • Hardware included • Qty. 1
12 Volt Breakaway Kit w/LED Charge Indicator This kit contains everything you need in a breakaway kit. It includes the breakaway switch, battery, box with LED charge indicator, charger, and mounting hardware. Replacement parts are available if needed. • Activates trailer brakes upon separation from the tow vehicle • Built-in LED battery meter verifies battery charge • LED's indicate: fully charged, re-charge, or charging • Complete system includes: box, battery, charger, 7" switch, and hardware • Built-in battery charger- charges battery while connected with the tow vehicle • 1-2 axle capacity • 5-amp hour battery • 5-5/8" Wide x 5-1/8" Tall x 4-1/8" Deep • Side-Mount installation design
Replacement break-away switch • Long lead wires • Metal zinc plated mounting bracket • Pin and cable included(replacements sold separately) • Works with 1-4 axle applications
12v, 5amp, sealed battery • 12 volt • 5 amp • Sealed - no spills • Commonly used in break-away kits
1-3/4" tang type spindle washer for 10, 12, and 15K spindles.
Replacement Breakaway Pin & Cable
2.25 Strap Shackle Kit
3.5K - 11" Equalizer
Bushing Nylon 9/16 x 2
Please enter your contact information and one of our representatives will get back to you with more information.
©
TrailerCentral. All Rights Reserved.
